![background image](http://html.mh-extra.com/html/power-craft/pbh-1500/pbh-1500_user-manual-and-warranty_1586358015.webp)
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PBH-1500
15
operation
- Retighten the screw firmly.
Function selection switch
Fig. D
The correct position of the selection switch for each machine function is given
in the diagram on page 3.
1 = Demolition hammer/chisel
2 = Rotary hammer drill
3 = Drilling
Switching On/Off
This machine is equiped with a safety button. To unlock the switch, press the
safety button.
- To start the drill, press the On/Off switch.
- To stop the drill, release the On/Off switch.
Speed control.
With the turning wheel in the main handle the speed can be set. The higher
the number, the faster the speed.
CAUTION: Running the machine too long at a low speed can cause the motor
to overheat.
Installing dust catcher
Fig. E
The dust catcher prevents large amounts of drilling dust entering the
machine when drilling into ceilings.
- Remove the drill bit
- Slide the dust catcher over the shaft of the drill bit.
- Place the drill bit with catcher in the drill chuck.
- Always replace a damaged dust catcher immediately.