background image

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626 

Web Support: www.servotool.eu

Model Number: PBH-1500 

10

Safety instructions

The term “power tool” in the warnings refers to your mains-operated 
(corded) power tool or battery-operated (cordless) power tool.

1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the 

presence of flammable liquids, gases or dust. Power tools create sparks 
which may ignite the dust or fumes.

c)  Keep children and bystanders away while operating a power tool. 

Distractions can cause you to lose control.

2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any 

way. Do not use any adapter plugs with earthed (grounded) power tools. 
Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, 

radiators, ranges and refrigerators. There is an increased risk of electric 
shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a 

power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or 

unplugging the power tool. Keep cord away from heat, oil, sharp edges or 
moving parts. Damaged or entangled cords increase the risk of electric 
shock.

e) When operating a power tool outdoors, use an extension cord suitable for 

outdoor use. Use of a cord suitable for outdoor use reduces the risk of 
electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual 

current device (RCD) protected supply. Use of an RCD reduces the risk of 
electric shock.

3) Personal safety
a) Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use a power tool while you are tired or 
under the influence of drugs, alcohol or medication. A moment of 
inattention while operating power tools may result in serious personal 
injury.

b) Use personal protective equipment. Always wear eye protection. Protective 

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing 
protection used for appropriate conditions will reduce personal injuries.

Summary of Contents for PBH-1500

























Reviews: