Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100
15
Operation
•
Hold the machine firmly and move it against the workpiece. Move the
grinding disc evenly across the workpiece.
•
Move the machine during roughing under an angle of 30º - 40º across the
workpiece (fig. 7).
•
The machine must be moved in same direction as the arrow on the tool
head shows, in order to prevent the tool from being pushed out of the
cut in an uncontrolled manner (fig.8). Let the speed of the cutting disc do
the work, do not apply pressure on the tool. Do not break cutting discs
with side pressure and do not tilt the tool while cutting.
•
Inspect the grinding disc regularly. Worn discs have a negative effect on
the machine.
•
Do not put the machine down when the motor is still running. Do not
place the machine on a dusty surface. Dust particles may enter the
mechanism.
•
Always switch off the machine first before removing the plug from the
wall socket.
Never use the spindle lock to stop the motor.
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100
06
Safety instructions
The following symbols are used in these instructions:
Read the instructions carefully.
Conformity with the relevant EU safety directives.
Class II machine - double insulation - earth connection not required.
Danger of life and risk of injury as well as risk of damage to the
machine in case of non-adherence to the safety instructions in
these instructions of use.
Danger of electric shock.
Risk of fire.
Keep bystanders away.
Remove the plug from the mains socket.
Wear safety glasses and ear protection.
Wear protective gloves.
Faulty and/or discarded electrical or electronic machine have to be
collected at the appropriate recycling locations.