![background image](http://html.mh-extra.com/html/power-craft/80036/80036_instruction-manual_1586293019.webp)
19
ENGLISH
INSTRUCTION MANUAL
Introduction
To get the most out of your new bench grinder,
please read through these instructions and
the attached safety regulations before use. We
recommend also that you save the instructions
in case you need to refer to them at a later date.
Technical specifications
Voltage/frequency:
230 V ~ 50 Hz
Power rating:
250W
Dry grinding stone:
No-load speed
2,950 rpm
Diameter
150 mm
Hole diameter
12.7 mm
Thickness:
16 mm
Wet grinding stone:
No-load speed
134 rpm
Diameter
200 mm
Hole diameter
20 mm
Thickness:
40 mm
Bench grinder parts
1. Water tank
2. Wet grinding stone
3. Protective shield
4. Spark screen
5. Dry grinding stone
6. Rest
7. Mounting holes
8. On/off button
Special safety regulations
Always use the correct type of grinding stone for
the type of work to be performed.
Never use damaged stones.
Never use stones that are too big.
Never put your hands close to the working area
while the bench grinder is rotating. Never allow
hands or fingers holding the item to be worked to
get close to the grinding stone while it is rotating.
Please note that both grinding stones rotate when
the bench grinder is switched on!
Do not use both grinding stones at the same time.
Always keep the spindle and flanges that hold the
grinding stones clean.
Never allow the grinding stones to make contact
with the item to be worked - or other objects -
when starting the bench grinder.
Do not touch metal filings until they have cooled.
Do not leave the bench grinder unattended until
the grinding stone has come to a complete stop.
Please note that it takes a little while for the
stone to come to a complete stop after you have
switched the machine off.