34
GB
Turning on/off
- Press the on/off button (1). You can
regulate the machine’s rpm by the way
in which you press the switch in.
- Once the switch (1) is released, the drill
chuck stops and rotation ceases.
- Push the rotation direction switch (2)
into the centre to lock the machine
when it is switched off . Do not put the
machine down until the motor has
stopped completely. Do not put the
machine on a dusty surface. Dust can
penetrate the mechanical parts.
Charging the battery
- Place the battery in the charger as
shown in the picture.
- Plug the charger into the mains. The red
LED indicator will now light up.
The drill battery does not come charged up.
Before using the battery for the � rst time,
it must be charged for approx. 5-7 hours,
for full power. The battery will only reach
its ultimate capacity after charging and
discharging 4-5 times.
Maintenance
Power Craft machines are designed
for a long service life with minimum
maintenance.
By cleaning regularly and treating it
correctly, you can help prolong service life
of the machine.
Cleaning
Clean the outside of the machine regularly
with a soft cloth, preferably after every use.
Ensure the ventilation slots
are free of dust and dirt. Use a soft cloth and
soapy water to remove any stubborn dirt.
Do not use solvents such as benzine,
alcohol, ammonia, etc. These can damage
the plastic parts of the machine.
Lubrication
No extra lubrication is required.
Defects
Contact your Power Craft dealer if defects
occur due to worn parts.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 07.00 to 17.00
(Fridays until 15.30)
• E-mail: [email protected]
