![background image](http://html.mh-extra.com/html/power-craft/66244/66244_instruction-manual_1586272030.webp)
30
GB
Place a piece of scrap wood under the item
when drilling thin sheet metal to avoid
deforming the sheet.
Lubricate the drill site with oil when drilling
metal. Use machine oil for steel and paraffi n
oil for aluminium.
To avoid splinters when drilling wood or
plastic, place a piece of scrap wood under
the item or drill from both sides.
Use a high drill speed when drilling plastic.
For large diameter holes, start with a small
diameter drill and then use the desired
diameter.
Service centre
For:
• Complaints
• Replacement parts
• Returns
• Guarantee issues
• Open 7.00 to 16.00
• E-mail: [email protected]
Declaration of compliance
We hereby declare that
DRILL
66244 (DD-HT80-10.8)
10.8 V
has been manufactured in accordance
with the following standards or normative
documents:
EN60745-1:2009
EN60745-2-1:2003/FprAE:2009
EN60745-2-2:2003/FprAD:2009
EN60745-1:2006
EN60745-2-1:2003+A11:2007+A1:2009
EN60745-2-2:2003+A11:2007+A1:2009
in accordance with the provisions of the
following directives
2006/42/EC The Machinery Directive
2010
Stefan Schou
Purchasing manager
01.07.2010 - HP Værktøj A/S, DK-7080 Børkop,
Denmark
Manufactured in P.R.C.
6001 - Shanghai Topower Industrial Co., Ltd., Shanghai,
China
EU Importer:
HP Værktøj A/S
DK-7080 Børkop
Denmark
© 2010 HP Værktøj A/S
All rights reserved. The contents of this user guide may
not be reproduced in part or whole in any way, electroni-
cally or mechanically (e.g. photocopying or scanning),
translated or stored in a database and retrieval system
without the prior written consent of HP Værktøj A/S.