![background image](http://html.mh-extra.com/html/power-craft/65400/65400_instruction-manual_1586258022.webp)
22
Cleaning and maintenance
The saw can be cleaned by wiping its exterior parts
with a damp cloth. Ensure the ventilation slots are
kept free of dust and dirt.
Never use corrosive or abrasive cleaning agents, as
they may attack the plastic parts of the saw.
Always make sure the chain guide on the blade is
free of sawdust and bark splinters to ensure correct
lubrication. Use compressed air to keep the guide
clear. Remove the chain to clean the guide if it
cannot be cleaned satisfactorily with the chain on.
Sharpen the teeth using a chainsaw file or grinder.
Be very careful when sharpening the teeth! Replace
the chain when the teeth are worn down to the
mark.
Fill the oil tank when the level is below the
minimum mark on the side of the tank.
Check for blade and sprocket wear and replace if
necessary.
Environmental information
You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.
ENGLISH
INSTRUCTION MANUAL
Problem
Possible cause
Possible solution
Motor will not start
1. No electricity
2. Chain lock activated
3. Carbon brushes worn
1. Check cable, plug and plug
socket, and that a relay has
not tripped out.
2. Release chain brake
3. Replace
brushes
Chain will not revolve
Chain brake activated
Release chain brake
Saw cutting ineffectively
1. Chain needs sharpening
2. Chain fitted incorrectly
3. Chain is loose
1. Sharpen
chain
2. Fit chain correctly
3. Tighten
chain
Saw cutting ineffectively Chain
comes off blade
Chain is loose
Tighten chain
The chain gets very hot
Chain lubrication not working Check oil level and that the
automatic chain lubrication is
working
Summary of Contents for 65400
Page 28: ...28 EXPLODED VIEW ...
Page 29: ...29 PART LIST ...