![background image](http://html.mh-extra.com/html/power-craft/54846/54846_instruction-manual_1586402016.webp)
16
ENGLISH
INSTRUCTION MANUAL
injury or damage. Always ensure the hose is not
lying where you could easily trip over it.
•
Excessive air pressure will wear out tools faster
and can constitute a hazard.
•
Do not allow the compressed air hose to come
into contact with sharp edges, heat or oil.
•
Never lift or carry compressed air tools by
their hose. Always hold the tool itself.
•
Check the air supply, all hoses, connections,
nipples and adapters and ensure that clean air
is being supplied at the correct pressure before
use. NEVER use the air supply and tool if this
is not the case! Never use any other pressurised
gases, such as oxygen or acetylene.
•
Always disconnect the air supply before
attaching or switching tools or accessories.
•
Check that the tool is not switched on before
connecting air hoses.
•
Always use respiratory protection equipment
and safety goggles when using compressed air
tools in dusty environments, as they can cause
dust to swirl around.
•
Compressed air tools can generate sound
levels in excess of 85 dB(A). If this is the case,
always use ear protectors.
•
Always maintain a firm grip on compressed air
tools during use, to avoid dropping the tool in
the event of sudden unexpected movements.
•
Disconnect the tool from its air hose when not
in use.
Compressed air supply specifications
•
Check that the air pressure in the hose is 90
psi (6.2 bar), and that the compressed air
supply is functioning correctly. If the hose is
very long (over 8 metres), the pressure can be
increased to compensate for the length.
•
Use compressed air hoses with an internal
diameter of 3/8".
Information specific to the air cut off tool
•
Always wear safety goggles when using the
tool!
•
Never use the tool if the protective equipment
has been removed or is not working!
•
Never hold workpieces in your hand.
•
Never use cracked or uneven blades.
•
Never use blades that are too big.
•
Make sure the blade is not in contact with the
workpiece or other objects when starting up
the tool.
Connection
1. Compressed air tool 9. Drain cock
2. Compressed air hose 10. Pipe
3. Oil cup
11. Air drier
4. Pressure regulator
12. Pipe
5. Filter
13. Compressor
6. Non-return valve
14. Automatic drain
7. Compressed air hose 15. To be drained daily
8. Connection
Summary of Contents for 54846
Page 21: ...21 EXPLODED VIEW ...
Page 22: ...22 PART LIST ...