21
NO
SE
FI
GB
DE
DK
PL
ET
Declaration of compliance
We hereby declare that
STAPLE GUN
26189 (J-105)
230 V
has been manufactured in accordance
with the following standards or normative
documents:
EN50144-1/A2:2003
EN50144-2-16:2003
EN55014-1:2006
EN55014-2/A1:2001
EN61000-3-2:2006
EN61000-3-3/A2:2005
in accordance with the provisions of the
following directives
2006/42/EC The Machinery Directive
2006/95/EEC The Low Voltage Directive
2011
Stefan Schou
PurchasingManager
09.12.2011 - HP Værktøj A/S, DK-6000 Kolding,
Denmark
Environmental information
HP Værktøj A/S endeavours to manufacture
environmentally-friendly electrical and
electronic products; we also wish to
contribute to the safe disposal of waste
substances which may be environmentally
hazardous.
A healthy environment is important for
everyone, and we have therefore set
ourselves the target of complying with
the requirements in the EU’s initiatives
in this area, which means we guarantee
the environmentally sound collection,
treatment, recovery and disposal of
electronic equipment which might
otherwise harm the environment. This also
means that our products do not contain any
of the following chemicals or substances:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
- PBB (polybrominated biphenyls) (flame
retardants)
- PBDE (polybrominated diphenyl ethers)
(flame retardants)
HP Værktøj A/S is proud to support the EU’s
environmental initiatives in order to play a
part in a cleaner environment and hereby
declares that our products comply with
both the WEEE Directive (2002/96/EC) and
the RoHS Directive (2002/95/EC).
As a consumer, you can also play a part in
protecting the environment by following
the applicable environmental regulations
and taking old electrical and electronic
equipment to your local recycling centre.
If the equipment contains batteries, you
must remember to remove these before you
dispose of the equipment.
Manufactured in P.R.C.
6001
EU Importer:
HP Værktøj A/S
6000 Kolding
Denmark
© 2011 HP Værktøj A/S
All rights reserved. The contents of this user guide may
not be reproduced in part or whole in any way, electroni-
cally or mechanically (e.g. photocopying or scanning),
translated or stored in a database and retrieval system
without the prior written consent of HP Værktøj A/S.
