Power Craft Garden 75028, Instruction Manual, Page: 17 / 23

17
Storage
Store the cleaner in a frost-free place during the
winter.
Cleaning and maintenance
Clean with a slightly damp cloth after use and
always keep all surfaces clean.
Never use corrosive or abrasive detergents, as they
may attack the plastic parts of the machine.
Troubleshooting
ENGLISH
INSTRUCTION MANUAL
Environmental information
You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.
Problem
Possible causes Solution
Cleaner running at reduced
or varying speed 1. Air in water supply system
2.
Input socket blocked or defective
1. Use water supply with no air
bubbles
2.
Have cleaner checked by
authorised workshop
Cleaner will not start 1. Plug not inserted correctly, on/off
switch not in ‘on’ position
2. Pump blocked
3.
Thermal cut-out activated
1. Inert plug in socket and switch
power on
2. Have cleaner checked by
authorised workshop
3. Wait until cleaner has cooled off
and then try again
Pump leaking Gaskets damaged Have cleaner checked by
authorised workshop
Motor cuts out suddenly Thermal cut-out activated Wait until cleaner has cooled off and
then try again
Pump pressure not as stated
on type plate 1. Air filter blocked
2. Air in pump
3. Suction or exhaust valve blocked or
defective
4. Overflow valve blocked
5.
Handle, nozzle or lance blocked or
defective
Have cleaner checked by
authorised workshop