CONFIDENTIAL
12
2. Lower the DIMM squarely into the slot so that the notches in the DIMM line up with the notches
in the slot. Slide the contacts straight into the slot and make sure the contacts are firmly seated.
(
see
Figure 8: Installing VRAM
on page 12).
When properly seated, the contacts on the bottom
should not be visible.
N
N
N
Nooo
otttteee
e::::
DonÕt force the DIMM module into the slot; if the MLB starts bending significantly, pull the
DIMM out, reposition it, and try again. If the DIMM module is seated correctly, the lever at the
end of the DIMM slot should be completely raised.
3. Reset the CUDA (
refer to
CUDA Reset
on page 4).
4. Replace the chassis cover (
refer to
Chassis Cover Removal/Installation
on page 6).
Figure 8: Installing VRAM