Power Bright APT1200-12, User Manual

Page: 6 / 11

Earth Connection:
-Connect the chassis ground first !!
-Lay the flexible chassis ground cable from the chassis of the vehicle to
the chassis ground on the rack of the inverter.
-Connect the chassis ground.
! Reverse polarity connection of the battery wires can damage the
inverter. Do not use the inverter with electrical systems using positive
ground.
AC input/output cable connection:
Connecting the ac wire:
- Black is Hot
- White is Neutral
- Green is Ground
-Connect the chassis ground first
!!
Make sure not to mix up the input and output. The input is your city utility
power company. Make sure it is not Live as you are working on the
connections. Inverter must also be OFF and/or disconnected from
battery(ies).
Recommendation: prior to connecting the ac output, we recommend you
power up the inverter and have a meter on the AC output to ensure all is
operating properly. If you get the 110-120Vac Output, then turn
off/disconnect ac power source and turn off the inverter, then make
output connection.
! Make sure there is no AC output (inverter off and no ac in) before
connecting to ac out. We recommend measuring AC output with an AC
volt meter prior to wiring. Ensure all cables and wires are connected
properly and are in good condition prior to use.
Connection to the AC socket:
Insert the inverter AC cable to power socket.