power automation PA 8000 LW Series, Installation Instructions Manual, Page: 24 / 132

Batteries contain toxic heavy metals. They are considered hazardous
waste and must be disposed of by approved specialized waste dis-
posal companies.
Electronic components are considered special waste. They must be
properly disposed of.
Power Automation will accept the control unit to properly dispose of its
components upon decommissioning.
n Follow the standard return procedure, as described in
Ä Chapter 9.3 “Return policy and procedure” on page 121 .
2.12 Labels
The following labels are attached to the control unit.
Readability Of Labels
–
Keep labels in readable condition at all times.
– Replace damaged labels (not including material warranty
seals).
– Replacements can be obtained from Power Automation.
Over the course of time labels may become dirty or nonreadable
for any other reason. Improper input voltages applied due to read-
ability of labels can damage the control unit.
The labels listed hereunder are located at the positions shown in
Fig. 3.
Fig. 3: Label positions
1 Material Warranty seal
2 Type Plate
3 License Operating system
Batteries
Electronic Components
NOTICE
Overview
PA 8000 LW CNC control unit
Safety
25.09.2015 | 24