Power Arc ArcPack PA1801, User Manual

Page: 5 / 10

WARNING – When using this product, basic precautions
should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary
when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended
or sold by power pack manufacturer
may result in a risk of fire or injury to persons.
f) Do not use the power bank in excess of its output rating.
Overload outputs above rating
may result in a risk of fire or injury to persons.
g) Do not use the power bank that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
h) Do not disassemble the power bank. Take it to a qualified
service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or injury to persons.
i) Do not expose a power pack to fire or excessive temperature.
Exposure to fire or temperature above 100°C may cause explosion.
The temperature of 100°C can be replaced by the temperature of 212°F.
j) Have servicing performed by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
k) This product will automatically go into standby mode
after 15 seconds when not in use. Please confirm the product is in standby mode
before storage.
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE
OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS