Step 3. Connect battery cables to your batteries
¾
Single battery connection: When using a single battery, its voltage must be equal to
the voltage of
Invisimo
Nominal Input Voltage (see specs)
¾
Series battery connection: When using multiple batteries in series, all batteries must
be equal in voltage and amp hour capacity, and the sum of their voltages must be
equal to the voltage of
Invisimo
Nominal Input Voltage (see specs)
¾
Parallel battery connection: When using multiple batteries in parallel, each battery’s
voltage must be equal to the voltage of
Invisimo
Nominal Input Voltage (see specs)
Step 4.
※
Charger Current Switch: You can adjust the position of Dip Switch to adjust charging
currency of battery.
30Amp(40Amp)
20Amp(30Amp)
10Amp(20Amp)
5Amp(10AMP)
Introduction
Invisimo
is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging
system, serving as an extended run UPS, a standalone power source or an automotive
inverter.
Invisimo
supplies power from AC power and DC source. When AC cable is connected to a
wall socket, utility power goes to connected equipment(s) and/or charges the battery set via
charging system. In UPS mode,
Invisimo
automatically convert battery energy into AC
power for backing up the connected devices.
Features:
9
30Amp(40Amp) built in powerful smart charger for long backup time and extended
battery life.
9
High efficiency and low idle current to keep low operating costs.
9
Quiet operation, heavy duty reliability.
9
Ecologically smart and user friendly.
9
Back-up, on-line, battery status, power status by LCD display.
9
Short circuit and overload protection.
9
Cold start (DC power on).
9
Advanced battery management (ABM).
9
Charging current can be adjusted by selector.
