INSTALLATION & ACCESSORIES
-
5
Owner’s Manual
CPAA-70M
EN
2-Din Headunit
MP3/MP4/USB/SD/AUX
Built-in AM/FM
Supports Apple CarPlay
Supports Android Auto
Note:
Put the 2 brackets to the left and right side of the headunit.
Use screws to
brackets to th
.
1. Make sure the ignition is
turned off, and disconnect the
cable from the vehicle battery’s
negative (-) terminal. You never
want electricity running white
you install this 2-DIN car receiver.
2. Before installation, discon-
nect the wire harness and the
antenna.
3. Attach the brackets on the
both sides of the car receiver
with screws as shown as the
figure. Please buy from your
dealer according to the drilling
of holes size.
Package contains the following for installation and operation of the unit.
Screws
User Manual
Trim Ring
Remote Control
Mounting
Brackets
Consult with your nearest
dealer if installation requires the drilling
of holes or other modification of the vehicle.
Install the headunit in the dashboard.
Connect the wire harness & antenna to the car receiver being carefully
not to pinch any wires or cables.
Install the plastic outer trim ring if needed onto the headunit .
Reconnect the
battery and run through all of the options on this car
receiver to ensure that everything is working correctly.
9. Resuts will vary widely depending upon the kind of your car and the car you
intend to install it in. Please choose the correct installation method according
to the actual situation of your car. Always contact the car dealer or
manufacturer if you have any questions.
ACCESSORIES
(2)
8
(1)
2
(3)
1
(4)
Warranty Card
(6) Power
1
(5)
1
(7)
1
1
ISO A
ISO B
