9
5.2 ELECTRIC STRIKE POSITIONING
WHEN INSTALLING THE ELECTRIC STRIKE AND FACE PLATE, POSITION IT IN THE DOOR FRAME, FRONT TO BACK, SO
THAT WHEN THE DOOR IS CLOSED THERE IS MINIMAL GAP BETWEEN THE STRIKE PLATE LATCHING SURFACE AND
THE DOOR LATCH. WHEN CLOSED, THE DOOR SHOULD HAVE LITTLE TO NO WIGGLE ROOM.
STRIKE PLATE LATCHING SURFACE. THIS IS
WHAT COMES IN CONTACT WITH THE DOOR
LATCH. ADDITIONAL SHIMS PROVIDED WITH THE
STRIKE CAN BE USED IF THERE IS STILL TOO
MUCH WIGGLE ROOM BETWEEN THE DOOR
LATCH AND THE STRIKE LATCHING SURFACE.
LOOSEN SCREWS TO
ADJUST STRIKE FRONT
TO BACK ON DOOR
JAMB
ADJUST FRONT TO BACK
DOOR LATCH
5. ELECTRIC STRIKE INSTALLATION
U.S Patent 7,418,800 B1 Power Access 2300DL REV 06-18-18 ©
