Powell BriteSpot BSG3, Instruction Bulletin

Page: 45 / 57

Powered by Safety
®
35 Usage
01.4IB.48040C
4) BriteAlert Web interface
Figure 44 shows the main BriteAlert web
interface page screen.
Figure 44 BriteAlert Web Interface
f. d
AtA
l
Og
The Data Log allows the user to visualize and
download temperature logs for data analysis
and trend recognition.
1) Log Rate and Timespan
There is a fixed amount of memory
available on the device for storage of the
Data Log. The data collection interval can
be set between 1 minute and 6 hours.
Increasing the frequency of the data
collection affects the timespan for which
data can be collected. Table X Onboard
Data Acquisition Timespans provides
approximate estimates for how long the
data can be logged.
Table X Onboard Data Acquisition Timespans
Log Rate Interval Memory Timespan
1 min 8 months
5 min 3 years
15 min 9 years
30 min 18 years
1 hour 36 years
2 hours 72 years
6 hours 216 years
2) Downloading Log File from Webpage
a. Obtain the data extraction executable,
G3 Interface Software.
b. Ensure power is applied to the device
and connect an Ethernet Cable between
the computer and the G3.
c. Initiate communication between
the two. Alternately, if the device
is connected to a local LAN and the
address of the device is known, the
web interface can be accessed directly
through any device connected to the
same LAN.
d. Launch the executable.
e. Ensure that the SYS LED is blinking
green and that the LINK and 10/100
LEDs are on.
f. Enter the IP Address of the device into
the IP Address field.