4
Fitting the Handlebars
The handlebars are already connected to the
frame by cables.
The handlebars and stem must be inserted
into the frame as shown, at least as far as the
minimum depth marker line on the stem.
Align the handlebars 90 degrees to the forks.
Finally, use an Allen key supplied or
hexagonal tool to tighten the handlebar stem
in place.
NOTE: We recommend you make a final
adjustment of the handlebars once the bike is fully
assembled.
Fitting the Pedals
Pedals are marked L and R, for the left and
right side of the bicycle when facing forward.
Screw each pedal into the appropriate crank
(pedal shaft) by hand, then tighten with a
spanner to secure.
NB. The left pedal has a reverse thread and
therefore need to be screwed in
anticlockwise.
