Version 07/06
5
6.
Fit Rear Wheels: for the right rear wheel, locate the 3 pins on axle into the holes on
wheel (fig 9). Tighten nuts (22mm). Tap on plastic nut covers (fig 10).
Note: do not tighten too much nuts because otherwise, you will damage wheels
bearings.
7.
Working right way up with electrical connector to near side (left if sitting on bike).
Remove the black angle bracket on the axle nut near side (fig 12, 13) and undo the
rubber protection cap (fig 14). Fit front wheel to forks between washers on near side
only. Remove one washer on off-side axle ensure good fit on axle (fig 15, 16). Line up
Front wheel with forks.
Note: to fit front wheel to forks, before to assemble it, lightly widen the forks by
pulling apart while offering the wheel into position.
Fig 12
Fig 13
Fig 14
Fig 11
Fig 10
Fig 9
Summary of Contents for Powatryke
Page 1: ...14 07 2006...
