Poulan Pro PR6Y21RP, Operator'S Manual

Page: 17 / 28

English – 17
MAINTENANCE
General
• Let your Husqvarna dealer regularly check the
• machine and make essential adjustments and repairs.
• Replace any damaged, worn or broken parts.
• Always use genuine accessories.
Maintenance schedule
In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on average use of the machine, and may differ
depending on the rate of your personal use.
√
omu
* If so equipped
** Machines equipped with electric start
***Power-Propelled machines
****Use a scraper to clean under deck
Note 1: When operating with a heavy load or at high ambient temperatures, or other extreme conditions, service the
machine more often. Note 2: Clean more often if conditions are exceptionally dusty. Note 3: Replace blades more often
when mowing in sandy soil. Note 4: Charge the battery for max. 48 hours. Note 5: And after 5 hours of use.
!
WARNING! The user must only carry out the maintenance and service work described in this
manual. More extensive work must be carried out by an authorized service workshop.
Switch off the engine before carrying out any checks or maintenance. Stop the engine (motor) and
wait until the blade comes to a complete stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge chute. Prevent unintentional starting by removing the
ignition cable from the spark plug. The starter key or battery must also be removed on machines
with electric start.
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest servicing dealer.
Daily Maintenance Lawn mower
Before
use After
each use Every 10
hours Every 25
hours Every 100
hours Before
storage
Tighten bolts and nuts. X X
Clean / Inspect Grass Catcher * X X X
Check tires X
Check drivewheels*** X
Clean the machine**** X X
Clean under the drive cover*** X
Check the drive belt / Pulleys*** X
Check that the cutter is undamaged and not
cracked. Replace the cutter if necessary.
X
3
General lubrication X
Clean and Recharge Battery ** X X
4
Engine
Check the engine’s oil level X
5
Change engine oil X
1,2
Clean the air filter. Replace if necessary. X
2
Check that the muffler is securely attached and
not damaged.
X
Replace the spark plug. X
Empty fuel tank or add Stabilizer X