6
Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To
ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard
wrench sizes are listed.
(1) Tire pressure gauge
(2) 9/16" wrenches
(1) Utility knife
(1) 1/2" wrenches
(1) 3/4" socket w/drive ratchet
(1) Pliers
When right or left hand is mentioned in this manual, it means
when you are in the operating position (seated behind the
steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
•
Remove all accessible loose parts and parts cartons
from carton.
•
Cut, from top to bottom, along lines on all four corners
of carton, and lay panels flat.
•
Remove mower and packing materials.
•
Check for any additional loose parts or cartons and
remove.
HOW TO SET UP YOUR TRACTOR
CHECK BATTERY (See Fig. 2)
•
Lift hood to raised position.
•
If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.
(See "BATTERY" in CUSTOMER RESPONSIBILITIES
section of this manual for charging instructions).
LABEL
FIG. 2
ASSEMBLY
FIG. 1
BEFORE REMOVING TRACTOR
FROM SKID
ATTACH STEERING WHEEL (See Fig. 1)
•
Remove locknut and large flat washer from steering
shaft.
•
Position front wheels of the tractor so they are pointing
straight forward.
•
Slide the steering sleeve over the steering shaft.
•
Align tabs and press steering sleeve extension into
bottom of steering wheel.
•
Position steering wheel so cross bars are horizontal
(left to right) and slide onto steering wheel adapter.
•
Secure steering wheel to steering shaft with locknut
and large flat washer previously removed. Tighten
securely.
•
Snap steering wheel insert into center of steering
wheel.
•
Remove protective materials from tractor hood and
grill.
IMPORTANT:
CHECK FOR AND REMOVE ANY STAPLES
I N S K I D T H A T M A Y P U N C T U R E T I R E S W H E R E
TRACTOR IS TO ROLL OFF SKID.
STEERING WHEEL
INSERT
LOCK NUT
LARGE FLAT WASHER
STEERING WHEEL
STEERING
WHEEL EXTENTION
TABS
STEERING
SHAFT
STEERING
SLEEVE
STEERING
WHEEL
ADAPTOR
For Parts Call K&T 606-678-9623 or 606-561-4983
www.mymowerparts.com
