12
OPERATION
POWERING ON AND OFF
•
To power on, first press the safety switch
button (1).
• While pressing the safety switch button
with one hand, use your other hand to
simultaneously pull the bail switch (2)
toward you. Once the machine powers
on, release the safety switch button and
proceed with operation. The snow thrower
can only be started by pressing the safety
switch button first, followed by squeezing
the bail switch; reverse operation will not
start the machine.
• To power off, release your grip on the bail
switch.
CAUTION:
Do not attempt to override
the operation of the safety switch button or
bar lever.
WARNING:
The operation of any
snow thrower can result in foreign objects
being thrown into the eyes, which can cause
severe eye damage. Always wear safety
glasses while operating the snow thrower and
while performing any adjustments or repairs.
WARNING:
Keep bystanders a safe
distance from the machine.
INSPECT THE CLEARING AREA.
Remove
all stones, sticks, wire, bones, and other debris
that might be thrown by the rotating impeller.
UTILIZING THE LED LIGHTS
To utilize the LED lights (1) for night time
snow removal, activate the LED light switch
(2).
NOTE:
After you have finished using your
snow thrower, remember to turn off the light
switch.
ADJUSTING THE DISCHARGE CHUTE
AND CHUTE DEFLECTOR
• To adjust the discharge chute, rotate the
handle (1) on the chute control rod in the
direction that you wish to direct the snow
stream.
•
To adjust the chute deflector (and
therefore the height of the snow stream),
squeeze the trigger (2) and raise or lower
the chute deflector.
1
2
1
2
2
1
