background image

19

AGE:

This warranty shall be for a period of

two years from the initial date of purchase.

WHAT IS COVERED: REPAIR OR RE-

PLACEMENT OF PARTS.

Repair or re-

placement of any warranted part will be per-

formed at no charge to the owner at an

approved ELECTROLUX HOME PROD-

UCTS, INC., servicing center. If you have

any questions regarding your warranty

rights and responsibilities, you should con-

tact your nearest authorized service center

or call ELECTROLUX HOME PRODUCTS,

INC., at 1--800--554--6723.

WARRANTY

PERIOD:

Any warranted part which is not

scheduled for replacement as required

maintenance, or which is scheduled only for

regular inspection to the effect of “repair or

replace as necessary” shall be warranted for

2 years. Any warranted part which is sched-

uled for replacement as required mainte-

nance shall be warranted for the period of

time up to the first scheduled replacement

point for that part.

DIAGNOSIS:

The owner

shall not be charged for diagnostic labor

which leads to the determination that a war-

ranted part is defective if the diagnostic work

is performed at an approved ELECTROLUX

HOME PRODUCTS, INC., servicing center.

CONSEQUENTIAL DAMAGES:

ELEC-

TROLUX HOME PRODUCTS, INC., may

be liable for damages to other engine com-

ponents caused by the failure of a warranted

part still under warranty.

WHAT IS NOT

COVERED:

All failures caused by abuse,

neglect, or improper maintenance are not

covered.

ADD--ON OR MODIFIED PARTS:

The use of add--on or modified parts can be

grounds for disallowing a warranty claim.

ELECTROLUX HOME PRODUCTS, INC.,

is not liable to cover failures of warranted

parts caused by the use of add--on or modi-

fied parts.

HOW TO FILE A CLAIM:

If you

have any questions regarding your warranty

rights and responsibilities, you should con-

tact your nearest authorized service center

or call ELECTROLUX HOME PRODUCTS,

INC., at 1--800--554--6723.

WHERE TO GET

WARRANTY SERVICE:

Warranty services

or repairs shall be provided at all ELECTRO-

LUX HOME PRODUCTS, INC., service

centers. Call 1--800--554--6723.

MAINTE-

NANCE, REPLACEMENT AND REPAIR

OF EMISSION RELATED PARTS:

Any

ELECTROLUX HOME PRODUCTS, INC.,

approved replacement part used in the per-

formance of any warranty maintenance or

repair on emission related parts will be pro-

vided without charge to the owner if the part

is under warranty.

EMISSION CONTROL

WARRANTY PARTS LIST:

Carburetor,

Ignition System: Spark Plug (covered up to

maintenance schedule), Ignition Module.

MAINTENANCE STATEMENT:

The owner

is responsible for the performance of all re-

quired maintenance as defined in the in-

struction manual.

The information on the product label indicates which standard your engine is certified.

Example: (Year) EPA Phase 1 or Phase 2 and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)

Intermediate (125 hours)

Extended (300 hours)

Summary of Contents for 530164293




















Reviews: