background image

10

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.  
Save this manual for future reference.

ATTACHMENT CLUTCH LEVER

 - Used to engage the 

mower blades, or other attachments mounted to your 
tractor.

LIGHT SWITCH POSITION

 - Turns the headlights on and 

off.

THROTTLE/CHOKE CONTROL

 - Used for starting and 

con trol ling engine speed.

CLUTCH/BRAKE PEDAL

 - Used for declutching and brak-

 ing the tractor and starting the engine.

PARKING BRAKE

 - Locks clutch/brake pedal into the 

brake position.

AMMETER

 - Indicates charging (

+

) or discharging (

-

) of 

battery.

GEARSHIFT  LEVER 

- Selects the speed and di rec tion 

of the tractor.

ATTACHMENT LIFT LEVER

 - Used to raise, lower, and 

adjust the mower deck or other attachments mounted to 
your tractor.

LIFT LEVER PLUNGER

 - Used to release attachment lift 

lever when changing its position.  

IGNITION SWITCH

 - Used for starting and stopping the 

engine.

Our tractors conform to the safety standards of the American National Standards Institute. 

FIG. 4

PARKING 
BRAKE

CLUTCH/
BRAKE
PEDAL

THROTTLE/
CHOKE
CONTROL

GEAR SHIFT
LEVER

ATTACHMENT 
LIFT LEVER

LIFT LEVER 
PLUNGER

IGNITION
SWITCH

ATTACHMENT 
CLUTCH LEVER

LIGHT SWITCH 
POSITION

HEIGHT 
ADJUSTMENT 
LEVER

AMMETER

Summary of Contents for 191798





























Reviews: