GB
MAINTENANCE AND SERVICE
- 30 -
0300-GB WARTUNG (348)
Increased cutting height with high – cut mowing plates
Distance disc (basic equipment)
• In the basic equipment of the machine the cutting height can be
adjusted by adding distance discs
- See chapter « Bringing into operation »
High - cut mower disc (optional equipment)
By doing so the cutting height is increased by 23 mm.
By removing individual distance discs the cutting height can be
reduced.
Conversion to high – cut mowing plates
1. Remove nuts (M)
2. Mount high – cut mowing plate (H1)
- First of all screw hexagon distance piece (SK) onto threaded
bolts, then screw tight
- Mount high – cut mowing plate (H1) by means of hexagon
screws M10x16 and circlip (F)
3. After several hours of operation check if all screws are tight.
The conversion of high – cut mowing plates (H1) to standard skid discs (S1) is done in the reverse order.