GB
MAINTENANCE AND SERVICE
- 29 -
0300-GB WARTUNG (348)
Cutters
The cutters on a cutting drum should be evenly worn
out, (danger of imbalance) otherwise they are to be
replaced by new ones.
Pay attention to correct assembly!
- Cutters with the notation “L” are only to be mounted on the left
rotating mowing drum.
- Cutters with the notation “R” are only to be mounted on the right
rotating mowing drum.
Mower disc
With mower discs that are worn in the mowing blade area, you must proceed
as follows:
• Remove both bottom skid plates.
• Remove screws from knife guide (30).
• Move knife guide approx. 60°.
• Tighten screws firmly (120Nm).
- check for tightness after several hours of operation.
• Refit both bottom skid plates properly.
Fahrtrichtung
TD 86/98/08
R
L
TD 79-99-06
120 Nm
(12 kpm)
30
S1
M