Pottery Barn Hayden Pressure Balance Shower Trim and Hand Shower Kit, Quick Start Manual

Page: 1 / 2

Hayden Pressure Balance
Shower Trim and Hand Shower Kit
Hayden – Shower Trim and Hand shower kit Page 1
FEATURES

Diaphragm cartridge maintains water
temperature within ± 2°

Compensates for water pressure
fluctuations preventing scalding

Flow rate: 6-7 gpm at 80 psi

Solid brass construction

Warranty:
o
Limited lifetime warranty
(residential use)
o
One year (commercial use)

Standard finishes:
o
polished chrome
o
satin nickel
o
polished nickel
o
antique bronze

Listed by IAPMO, CSA, NSF, and
other municipalities

Shipping weight (lbs.): 15.7

Shipping dimensions(in.): 12 x 22.5
x13
IMPORTANT INSTALLATION INFORMATION

USE TEFLON TAPE OR PIPE SEALANT FOR THREADED CONNECTIONS

DO NOT USE PLUMBER’S PUTTY ON ANY OF THE BRASS COMPONENTS
This will cause the finish to tarnish and void the warranty. A non-corrosive Alkoxy Silicone is
recommended.

DURING SWEATING OF LINES DO NOT OVERHEAT CASTING
Overheating may cause damage to internal mechanism

COPPER ADAPTORS MAY BE REQUIRED TO COMPLETE YOUR INSTALLATION
Parts Checklist
Carefully remove all parts from the box.
The following parts should be included.
ID # Description Qty
1 Shower arm 1
2 Shower arm flange 1
6 SH-TIT50 Shower head 1
8 ELB-8001 elbow 1
10 SH-LFT30 hand shower 1
24 PB-6524-24 Positioning
Bar 1
39 Face plate SS-PFP925 1
41 Diverter knob and post 1
47 Handle and escutcheon 1
52 DS-4079 shower hose 1