Assembly Instructions:
To replace the submersible pump, please follow these steps:
1. Unplug the water pump to power supply.
2. Remove any existing water on the basin of the fountain.
3. Lift the top tier (C) and detach the flexible hose from the submersible pump.
4. Pull out the wire power cord of submersible pump from the basin of the fountain.
5. Insert new submersible water pump into the basin, then connect the flexible hose into the water
pump.
Care Instructions:
Handle with extra care.
Wipe with clean wet rag.
Thank you for your purchase
Store | Catalogue |
USA 1.888.779.5176
1. Put the base of the fountain (A) and place the basin of the fountain (B)
at the top part of the base of the fountain (A), twist clockwise to lock.
2. Put the submersible pump (G) inside the basin (B) of the fountain. Then
insert its electrical wire into the hole of the pipe (F) that is on the inner part of
the basin (B) of the fountain. Thread the electrical wire through the body of
Base (A) and let the plug out of the bottom of Base (A).
3. Put the top tier (C) of the fountain and connect the flexible hose (E) to the
spout of the submersible pump (G). Make sure the flexible base (E) is
connected tightly to the submersible pump (G) then place the top tier (C)
on the basin (B) of the fountain.
4. Put 4 litres of water inside the basin (B) of the fountain then Plug the male
plug into the outlet.
