Potensic Dreamer 1, User Manual, Page: 15 / 27

13
INTRODUCTION OF SETUP INTERFACE
Calibration Settings
2
Remote Controller Settings
3
Main Controller Settings 1 About Smart Battery 4
More 5
1
2
3
4
5
Matters Needing Attention When Flying
FLIGHT
1. Make sure the remote controllers, smart flight batteries and mobile devices fully charged.
2. Check whether the fuselage is complete and the propeller is properly installed.
3. Whether the camera and the platform work properly after the power is turned on.
4. Make sure the App working properly.
5. Check whether the Micro SD card is inserted, and ensure that the camera is clean.
6. Low-power protection: When the battery power of the drone is less than 20%, the done will trigger
one key return function.
7. Lost-of-control protection: The done will trigger one key return after disconnection for 3 seconds;
If the drone is successfully re-connection during return the drone will hover in the air.
8. Out-of-control protection: After the horizontal tilt angle is greater than 80 degrees 0.5 seconds,
the drone will lock automatically and fall directly.
CONNECTION BETWEEN THE REMOTE CONTROLLER AND THE DRONE
The remote controller and the drone have been already paired when they leave the factory and can
be controlled just after being powered on. But after replacing a new remote controller, the remote
controller and the drone need to be re-paired to use. The pairing steps are as follows:
CONNECTION