9
OBM-H120
Extreme Super Bright Screen
Professional Video Monitor
A : SDI IN (SDI Input) connectors (BNC)
Input connectors for SDI signals.
B : SDI OUT (SDI Output) connectors (BNC)
Output connectors for SDI signals.
Each connector outputs the signal which is input to the corresponding SDI IN connector.
**Note
- Output is ac vated only when the power is on. Output is not ac vated in standby mode.
**When the input is SDI, the SDI signal is output. When the input is HDMI, the HDMI signal is converted
and then output.
C : Analog Input connectors
Input connectors for analog signals (CVBS, Component).
D : HDMI Input connectors
Input connectors for HDMI signals.
E : HDMI Output connector
Output connector for HDMI signals.
F : PARALLEL REMOTE connector(RJ-45, 8-pin)
Forms a parallel switch and controls the monitor externally.
**Note -
For safety, do not connect the connector for peripheral device wiring that might have excessive
voltage to this port. Follow the instruc ons about this port.
[Pin Assignment]
Func ons can be changed in [Remote] sec on of the menu.
1
8
Pin Number
Func on
3G SDI-A
3G SDI-B
HDMI
Zero Scan
Analog
1:1 Scan
Power
GND
1
2
3
4
5
6
7
8
A
B
C
L
D
E
F
H
G
K
I
J
