7
OBM-H120
Extreme Super Bright Screen
Professional Video Monitor
E : Menu Opera on Bu ons
Displays or sets the on-screen menu.
[MENU/RETURN]
- Ac vates and deac vates the display of the Main Menu.
- When the on-screen menu is not displayed, if this bu on is pressed the main menu is displayed.
When the menu is displayed, press the bu on to return to the previous menu.
[SEL/VOL] knob (Menu selec on control)
- When the menu is displayed, turn the knob to select a menu item or a se ng value, and then press the
knob to confirm the se ng.
- If this knob is pressed when the menu is not displayed, the adjustment screen of [VOLUME] is displayed
to adjust the audio volume.
- Press this knob to change the modes in the order of [Focus Frequency], [Zebra Level], [Line Posi on],
[Variable Marker] and adjust each mode’s value.
[Focus Frequency]: When Focus Assist func on is ac vated, this mode is displayed.
[Zebra Level]: When Zebra func on is ac vated, this mode is displayed.
[Line Posi on]: When WFM/Vector func on and Line Select func on is ac vated, this mode is displayed.
[Variable Marker]: When Marker func on is ac vated and Aspect Marker is set Variable, this mode is displayed.
F : (Standby) Switch and Indicator
- Press to turn the power on when this monitor is in standby mode. A er being turned on, the monitor
performs ini aliza on and the indicator flashes in green.
- Press the switch again for a second to set the monitor in standby mode. Then, the indicator flashes in
orange and then turns red. The indicator in orange means that the monitor goes into the standby
mode.
When the indicator flashes in orange, this bu on doesn’t work.
C : Func on Bu on/Lamp
Press to adjust or turn/off each func on.
[SCAN] Bu on
- Press the bu on to adjust the scan mode. (Zero Scan, 1:1 Scan).
[ASPECT] Bu on
- Press the bu on to select the Aspect Ra o of the signal.
- Mode changes in the order of [16:9], [4:3], [2.35:1], [1.85:1], [15:9], [16:10], [AUTO].
[MARKER] Bu on
- Press the bu on to ac vate and deac vate the Marker.
[BLUE ONLY] Bu on
- Press the bu on to ac vate and deac vate the Blue Only func on.
- You may remove R(red) and G(green) from the input signal and display the screen only with B(blue) signal.
This func on is convenient to adjust Chroma and Phase and to observe the signal noise.
- The bu on may be pressed twice to change the screen to MONO mode.
(This mode uses only Luminance value.)
[KEY LOCK] Bu on
- Press the bu on to lock all bu ons except Power.
D : Rotary Encoder
[BRIGHT] knob
Press this knob to display the adjustment screen and adjust the picture brightness. Press again to hide the
adjustment screen. Turn the knob right to increase the brightness and turn le to decrease it.
[CONTRAST] knob
Press this knob to display the adjustment screen and adjust the picture contrast. Press again to hide the
adjustment screen. Turn the knob right to increase the contrast and turn le to decrease it.
[CHROMA] knob
Press this knob to display the adjustment screen and adjust the color intensity. Press again to hide the
adjustment screen. Turn the knob right to increase the color intensity and turn le to decrease it.
[APERTURE] knob
Press this knob to display the adjustment screen and adjust the picture sharpness. Press again to hide
the adjustment screen. Turn the knob right to make the picture sharper and turn it le to make the
picture so er.
