Remote Menu
Remote
Embrionix emSFP Settings 1/2
SFP Select :
SFP-1
Primary/Secondary :
Primary
Flow :
Video
Source IP Address :
0. 0. 0. 0
Source Port No. :
0
Dest. IP Address :
0. 0. 0. 0
Dest. Port No. :
0
Format :
1080i59.94
3/3
**Note
S
FP module support is ac vated only when the module is
first connected and the monitor power is turned on.
Embrionix emSFP Se ng 1/2
SFP Select
- Select the op cal module to be used.
(SFP-1, SFP-2)
Primary/Secondary
- Select the page of emSFP flow.
(Primary/Secondary)
Flow
- Select emSFP flow.
(Video/Audio1/Audio2/Audio3/Audio4/Anciallary)
Source IP Address/Port No.
- Set Source IP/Port.
Dest. IP Address/Port No.
- Set the des na on IP/Port.
Format
- Set the video signal format.
(720p50,720p59.94,720p60,720p23.98,720p24,720p25,
720p29.97,720p30,1080p23.98,1080p24,1080p25,
1080psf25,1080psf29.97,1080psf30,1080p30,1080psf30,
1080i50,1080i59.94,1080i60,3GA 1080p50,
3GA 1080p59.94,3GA 1080p60,2048x1080p23.98,
2048x1080p24,2048x1080p25,2048x1080p29.97,
2048x1080p30,3GA 2048x1080p48,3GA 2048x1080p50,
3GA 2048x108p59.94, 3GA 2048x1080p60)
Remote
Embrionix emSFP Settings 2/2
PTP Mode :
MultiCast
PTP Master :
Auto
PTP Domain :
0
Video flows sender type : Narrow
Controller IP Address :
0. 0. 0. 0
Controller Subnetmask : 0. 0. 0. 0
Controller Port No. :
0. 0. 0. 0
3/3
Embrionix emSFP Se ng 2/2
PTP Mode
- Set the Precision me protocol (PTP) mode.
(Mul cast, Hybrid, Unicast)
PTP Master
- Set the UUID (Universally Unique IDen fier) mode.
(Auto, Manual)
PTP Domain
- Set the domain number of the PTP Master.
(0-255)
Video flows sender type
- Set the sender type of the emSFP video flow.
(Narrow, Narrow linear, Wide)
Controller IP Address, Subnetmak, Port No.
- Shows emSFP's control IP/Subnetmask and Port No.
OBM-8K Series
8K LCD Professional Monitor
12G-SDI Quad Link 8K
25
