User Configura on Menu
Page 2/7
- The following func ons are assigned in the factory.
[F1 Bu on] : Color Temp
[F2 Bu on] : Audio Level Meter
[F3 Bu on] : Time Code
[F4 Bu on] : Zebra & False Color
[F5 Bu on] : Focus Assist
Input Se ng
3G Signal Format
- Selects the format of 3G SDI input signal.
[Auto],[A 4:4:4 YUV 10b],[A 4:4:4 GBR 10b],
[A 4:4:4 YUV 12b],[A 4:4:4 GBR 12b],
[A 4:2:2 YUV 12b],[B DL 4:4:4 YUV 10/12b],
[B DL 4:4:4 GBR 10/12b],[B DL 4:2:2 YUV 12b],
[B DL 4:2:2 YUV 10b 60p]
SFP Enable
- Allows for SFP input to be selected by pushing
[SINGLE] bu on on the front panel.
12G Image Division
- Selects the image division of the 12G-SDI
Single Link signal between [2-Sample Interleave]
and [Square]
**Payload ID of 12G-SDI 2-Sample Interleave
signal and 12G-SDI Square division signal is the
same. So, Image Division cannot be detected
automa cally, and the user has to select it.
The default se ng is [2-Sample Interleave].
Image Division & Link Order
- Select from [Manual] or [Auto].
[Auto]:
Square / 2-S.I. The input automa cally recognizes
the VPID (Video Payload ID) embedded in the SDI
signal when it is normally present, and even if the
input is not connected properly, it splits the
image or links in order to reduce user error.
Set automa cally.
Also, when 12 signals are input, it automa cally
switches to single mode.
* Quad-Link Squre / 2-S.I in single mode.
In mode It does not change automa cally.
Audio delay se ng
Audio delay (lip sync)
-Set the delay me between the video and
audio signals. (0ms to 170ms). 17 steps.
OBM-8K Series
8K LCD Professional Monitor
12G-SDI Quad Link 8K
20
