User’s Manual for
TPL7000
Series Portable Data Terminal
11
Preparation
1.
Mount the Battery in the
TPL7000
Terminal
Take the
TPL7000
Portable Data Terminal out from the box;
place the accompanying battery in the battery compartment as shown in fig 1:
a.
Press the catch, slide the back cover, and lift it in the sequence.
b.
Place the battery in the compartment, and press it down.
c.
Place the cover back as indicated.
2.
Charge the battery
a. Put the
TPL7000
on the cradle as shown in figure 2.
b.
Connect the power adapter to the DB-9 (female) connector
c.
Insert the power adapter to the wall socket.
Fig 1 Fig 2
Note 1:
a.
The cradle can be connected both to the power adaptor for battery
charging and to the host computer for data uploading as well as
downloading at the same time.
b.
To charge the battery, connect the power plug of the power supply into
the power jack on the
DB-9
female connector.
c.
The
DB-9
(female) connector is used for battery charging and/or
communication with the PC.