22
Start Of Configuration
Example
To select 471 as the first three character in the first code pair1
And select 121 as the first three characters in the second code pair2.
The setting as following:
1.
Scan “start of configuration” label to enter programming mode
2.
Scan “Double code free character setting” label
3.
Scan code byte “4” from ASCII code table
4.
Scan code byte “7” from ASCII code table
5.
Scan code byte “1” from ASCII code table
6.
Scan “save setting to confirm” label to save first code pair setting
7.
Scan code byte “1” from ASCII code table
8.
Scan code byte “2” from ASCII code table
9.
Scan code byte “1” from ASCII code table
10. Scan “save setting to confirm” label to save second code pair setting
11. Scan ”end of “configuration” label exit programming mode
Japanese Double Field Support
Enable Japanese Double Field setting will decode two Japanese book at one
scan.
Japanese Double code enable
Double code not allowed
End Of Configuration
