Positron BRX-VDSL2 User Manual Download Page 4

Page: 4 / 43

BRX-VDSL2 User Guide

180-0153-001-R02



BRX-24S factory installed in UL approved pedestal and ready to accept BRX modules: BRX-

24-CS, BRX-24-1S, BRX-24-1SX, BRX-48-1S and BRX-48-1SX.

The BRX-24S conforms to

IEC 60950-1

UL 60950-1

CSA C22.2 #60950-1.

Les modèles BRX-VDSL2 suivants sont conformes aux normes

IEC 60950-1

UL 60950-1

/CAN

C22.2 #60950-1 et IEC 60950-22

UL 60950-22

/CAN

C22.2 #60950-22



BRX-VDSL2-2, BRX-VDSL2-8, BRX-VDSL2-24 dans leur boitier scellés ainsi que les

configurations incorporant un châssis BRX-24S assemblées en usine dans un piédestal

certifié UL: BRX-VDSL2-24-1SF, BRX-VDSL2-24-1-SPF, BRX-VDSL2-24-1-SXPF, BRX-

VDSL2-48-1SF, BRX-VDSL2-48-1-SPF, BRX-VDSL2-48-1-SXPF.



BRX-VDSL2-X-2, BRX-VDSL2-X-8, BRX-VDSL2-X-24 dans leur boitier scellés ainsi que les

configurations incorporant un châssis BRX-24S assemblées en usine dans un piédestal

certifié UL: BRX-VDSL2-X-24-1SF, BRX-VDSL2-X-24-1-SPF, BRX-VDSL2-X-24-1-SXPF,

BRX-VDSL2-X-48-1SF, BRX-VDSL2-X-48-1-SPF, BRX-VDSL2-X-48-1-SXPF.



BRX-24S installé en usine dans un piédestal certifié UL et prêts à recevoir des modules BRX:

BRX-24-CS, BRX-24-1S, BRX-24-1SX, BRX-48-1S and BRX-48-1SX.

Le BRX-24S est conforme aux normes

IEC 60950-1

UL 60950-1

CSA C22.2 #60950-1.

Precautions and warnings

Always use a circuit that provides POTS sealing current to the copper pair to power a BRX-VDSL2

unit. When deploying a BRX-VDSL2 on a copper pair without sealing current, always make sure to

use power injector devices approved by Positron Access Solutions for that use. Using power injectors

with voltage higher than 48V nominal may create risk of damaging the unit and void its warranty.

There are no user-serviceable parts in BRX-VDSL2 devices. Do not attempt to open the unit. Doing

so may damage the seals and prevent the unit from meeting its IP rating. Damaged seals may lead to

rain water leaking into the unit and damage to its electronics resulting into its malfunction or its total

failure. The BRX-VDSL2 devices should only be opened by a technician trained and certified to

service the product.

All wiring external to the product should follow the local wiring codes.

Be careful when splicing the BRX-VDSL2 pairs to the twisted telephone cable pairs. Dangerous

voltage can be present on the pairs. Splicing should be done by a qualified person. Never splice pairs

during a lightning storm.

Summary of Contents for BRX-VDSL2












































Search results

Summary of Contents for BRX-VDSL2

Reviews:

Related manuals for BRX-VDSL2

Brands by name

Popular brands

Positron BRX-VDSL2, User Manual

Search results

Summary of Contents for BRX-VDSL2

Reviews:

Related manuals for BRX-VDSL2

Brands by name

Popular brands