Positron BRX-VDSL2 User Manual Download Page 3

Page: 3 / 43

BRX-VDSL2 User Guide

180-0153-001-R02

Regulatory Compliance and Safety

FCC Declaration of Conformance

All of the BRX-VDSL2 models (includes BRX-VDSL2-X models) comply with part 15 class A of the

FCC Rules. Operation is subject to the following two conditions (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Part 15 Class A Information

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates; uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Industry Canada

All of the BRX-VDSL2 models (including BRX-VDSL2-X models) comply with ICES-003 of the

Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Tous les produits BRX-VDSL2 (incluant les produits BRX-VDSL2-X) sont conformes à la norme NMB-

003 d'Industrie Canada. Leur fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif

ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y

compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Safety

The following BRX-VDSL2 models conforms to

IEC 60950-1

UL 60950-1

CSA C22.2 #60950-1

and IEC 60950-22

UL 60950-22

CSA C22.2 #60950-22

standards:



BRX-VDSL2-2, BRX-VDSL2-8, BRX-VDSL2-24 sealed units along with the following factory

installation of a BRX-24S chassis in a UL approved pedestal: BRX-VDSL2-24-1SF, BRX-

VDSL2-24-1-SPF, BRX-VDSL2-24-1-SXPF, BRX-VDSL2-48-1SF, BRX-VDSL2-48-1-SPF,

BRX-VDSL2-48-1-SXPF.



BRX-VDSL2-X-2, BRX-VDSL2-X-8, BRX-VDSL2-X-24 sealed units along with the following

factory installation of a BRX-24S chassis in a UL approved pedestal: BRX-VDSL2-X-24-1SF,

BRX-VDSL2-X-24-1-SPF, BRX-VDSL2-X-24-1-SXPF, BRX-VDSL2-X-48-1SF, BRX-VDSL2-

X-48-1-SPF, BRX-VDSL2-X-48-1-SXPF.

Summary of Contents for BRX-VDSL2












































Search results

Summary of Contents for BRX-VDSL2

Reviews:

Related manuals for BRX-VDSL2

Brands by name

Popular brands

Positron BRX-VDSL2, User Manual

Search results

Summary of Contents for BRX-VDSL2

Reviews:

Related manuals for BRX-VDSL2

Brands by name

Popular brands