7715-3
8
Standalone Power Supply Unit, 48 Vdc to -24 Vdc
2.
Verify that you have the following customer supplied tools and hardware
which are required to install the unit:
•
Cable from station batteries
•
Center punch
•
Electric drill with a 5/32” diameter bit
•
7/16” hex wrench
•
Phillips screwdriver
•
Cable clamps and mounting hardware for routing cables exterior to the shelf
(quantity determined by the cable lengths involved).
3.
Unpack the Standalone Power Supply Unit and its installation hardware
from its protective box.
4.
Check the contents of your Standalone Power Supply Unit. For a listing of
the items included in the kit, refer to Table 4.
Table 4
Model 7715-3 Kit Contents
5.
Confirm that the unit is a Standalone Power Supply Unit by identifying the
model number on its faceplate.
Items Included
Qty
Part Number
Standalone Power Supply Unit
1
244-040025-401
Description and Installation document
1
7715-24-03
Mounting platform
1
7856-02-09
6.5’ power supply input cable (pre-wired to supply)
1
207-010091-401
6.5’ power supply output cable
1
207-010087-401
Anchoring brackets
2
7856-02-07
Hex screws with washers (#14A, 1” long)
3
724-990000-011
Mounting bolts (1/2” long)
2
724-020001-029
Washers #10 flat
2
738-990110-005
Lock washers #10
2
738-990010-005
Summary of Contents for 7715-3
Page 1: ...Standalone Power Supply Unit 48 V dc to 24 V dc 7715 3 Description and Installation...
Page 4: ......
Page 20: ......