6
Positioning your POS for a Perfect Viewing Angle
The adjustable bases designed for XT-5315/5515/5515Pro come in two models,
Gen 7E/8E, and allow you to determine an ideal position for your terminal by
using its unique tilt adjustment mechanism. As the below figures suggest, both
bases provide three standard positioning solutions for your terminal:
Flat
Folded mode
,
Low Profile mode
, and
Full Extended mode
.
XT-5315/5515/5515Pro with Gen 7E Base
Flat Folded mode
Low Profile mode
Full Extended mode
XT-5315/5515/5515Pro with Gen 8E Base
Flat Folded mode
Low Profile mode
Full Extended mode
In general, XT-5315/5515/5515Pro will be set up beforehand in
Flat Folded
mode and then packaged into the box for shipping. After it is unpacked, you
may re-adjust the terminal in either
Low Profile
mode or
Full Extended
mode
according to your situation. Below will provide instructions on how to adjust
the specific base connected to the POS system. As a reminder, please be
careful not to touch the LCD panel while setting up the tilt angle.
XT-5315/5515/5515Pro with Gen 7E Base
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-5315/5515/5515Pro
with Gen 7E base.
1.
Unpack XT-5315/5515/5515Pro, which is
supposed to be set in flat folded mode, out of
the package box and then lay your POS
system on a flat surface.
2.
Steady the base with one hand, and then tilt
the screen downwards.
