Part 7
DISCONNECTING ALL CABLES
After removal of the cable cover, the connector area will be accessible then.
Please
first note orientations of every existing cable connection
and then
disconnect every cable properly before separating the main unit from the
adjustable stand assembly. Please note that the click lock spring has to be
pressed down prior to pulling out the connector such as the LAN port or the
CR port or the alternate RJ45 form COM3/4 port. Please also note that the
fixing screws have to be loosened free prior to disconnection such as the 2
regular DB9 form COM ports or the VGA port. Please
always hold the
connector head
instead of pulling on the cable wire when disconnecting any
connector. Failure to do this could damage the cable and jack that is
considered as an
artificial destruction. Damages due to incorrect
disconnection operation are not covered by product warranty!
CABLE PASSAGE FROM BOTTOM
For Gen 7&8 Base
Please route all cables through the cable passage to main unit in desktop mount
application. Pull the compression lock to open the back cover of base stand.
Hold them together with a cable tie. Pass all cables through the cable exit to
external connections.
B
A
C
