3
View of Rear I/O Interface of TX-2000/2100
1 Line out
2 USB 2.0 port
3 RJ45 LAN port
4 Dual DSub VGA port
5
COM (DB9) port
(COM 1 / COM 2)
6
COM (RJ50) port
(COM 3 / COM 4)
7 LPT Port
8 12VDC-IN power jack
9 RJ11 cash drawer (CR) port
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the connector
of power adapter and all of the connectors of required I/O cables
respectively to the 12VDC-IN power jack and appropriate I/O ports.
Please make sure that each of the cables is fully connected to the
correct port. Damages due to incorrect connection or orientation are not
covered by product warranty!
Some cable connectors like the connectors of COM (RJ50) or LAN or
cash drawer (CR) cables have to be gently inserted until a click sound is
given. It is recommended that the I/O ports, such as COM (DB9) port
and VGA port, should be fastened with connector thumb screws after
the I/O cable connectors are completely connected. And please make
sure that each connector has to be connected to the right peripheral
device in the right way.
2 3
4
5
6
7
1
8
9
