8
5.
Neatly arrange the cables.
Locate the cable holder inside the base as
shown in the figure. Push down the lever to release if from the hook,
pass the cable through cable holder, and then press down the lever
again to lock it onto the hook.
6.
Make sure the cord can be held into place
and passed through the cable exit after
sliding back the stand cover.
7.
7.1
Place back the sytem back cover. Make sure
it is well locked into place with a click sound.
7.2
For the fire-resistant system back cover, please insert another
screw into the screw hole indicated in the figure, and secure it.
8.
Make sure the cable could be pulled out of
the cable exit from the bottom of the base.
Cable holder
Screw for Fire-Resistant
System Back Cover
Summary of Contents for RT-1016A
Page 15: ...15 MEMO...
Page 16: ...16 MEMO...
