POSIFLEX PD-300 Seroes, User Manual

Page: 4 / 4

4
PST COMMAND MODE:
HEX CODE FUNCTION
<01> Set Pass Through Flag (should not be used)
<06> <N
1
> <N
2
> Change Leading Code
<14> <01> Wraparound Mode (Default)
<14> <02> Vertical Scroll Mode
<14> <03> Insert Mode
<14> <04> Overwrite Mode (Default)
<14> <08> Back Space
<14> <09> Move Cursor Right
<14> <0A> Move Cursor Down
<14> <0B> Move Cursor Left
<14> <0C> Delete Character
<14> <0D> Move Cursor To Left Most Position
<14> <0E> Clear Display
<14> <10> Clear Line 1
<14> <11> Clear Line 2
<14> <12> Cursor Block Mode
<14> <13> Cursor Under Line Mode
<14> <15> <02> Clear Pass Through Flag
<14> <16> Switch To Epson Mode
<14> <17> Cursor On
<14> <18> Cursor Off
<14> <19> Reset
<14> <1A> <P> Move Cursor To Position P (P=0~13,14~27h)
<14> <1B> Move Cursor To Rightmost Position Of Line 1
<14> <1C> Move Cursor To Rightmost Position Of Line 2
Though the power on default of the PD300 series itself is the Epson
command mode, the system may have changed the mode to this PST command
mode after the whole power-on-self-test depending on the software system
installed. It would be advisable for the programmer to check ahead.
The Euro Dollar Sign is designated at code <D5>h.