10
2.
Adjust the screen downwards, and release the cable cover from the
base.
For 9.7” LM/TM-3110E/3310E monitors
,
please directly remove the neck cover from
the base.
If you are using 14” or 15” LM/TM-series monitors
, refer to the
below figures to first remove cable cover and then neck cover in the
direction shown by the arrow.
3.
After adjusting the screen to the horizontal position, take one end of
the VGA cable and have it passed through the cable exit.
9.7” LM/TM-3110E/3310E
14” or 15” LM/TM-31XXE/33XXE
4.
Secure the VGA cable to the VGA port at the
bottom I/O plate of your monitor.
5.
Grab Type-B connector of USB cable to
route it through the cable, and then insert it
into Type-B USB port of your monitor.
Cable Exit
Cable Exit
