POSIFLEX LM-30 Series, User Manual, Page: 6 / 20

6.
Connect the monitor to the terminal using VGA cable.
6.1 Connect one end of the VGA cable to
the VGA port at the bottom I/O plate
of your monitor.
6.2 Take the other end of VGA cable to
insert it into the VGA port of your
terminal.
7. For TM series users, connect the monitor to the terminal using USB
type A to B cable to enable touch function for your monitor. If the
monitor you are using isn’t TM series, please skip this step .
7.1 Grab Type-B connector of USB
cable, and then insert it into Type-B
USB port of your monitor
7.2 Properly attach Type-A connector of
USB cable to your POS terminal.
8. Break the release tab of the top I/O interface
cover for HS series terminal.
9. After tucking the extra cable into the I/O
compartment and thread the cable through the
cable exit, push the back cover into place.
10. After ensuring the monitor is well installed, tilt
your monitor up or down to your desired angle.
While setting up the tilting adjustment, be
careful not to press on the LCD panel.
Cable Exit
6