background image

 

 

Part 1 

 
 
 
 

I. 

FEATURES 

• 

8” LCD monitor with tilt adjust for industrial and commercial use 

• 

Application covers POS, POI (Kiosk), Factory Automation etc. 

• 

High quality TFT LCD panel 

• 

Spill proof and easy maintenance structure allowing easy cleaning 

• 

Super VGA interface super resolution up to 800 x 600 pixels 

• 

Support power supply through VGA cable from Posiflex POS systems to 
operate without power adaptor 

• 

Resistive type extra long life touch panel in USB interface (for TM-2008) 

• 

Touch functions include left/right button,  double click, drag & drop (for 
TM-2008) 

• 

Touch beep can be pitch adjusted/enabled/disabled by software control (for 
TM-2008) 

FCC NOTICE

 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

used in accordance with  the instructions manual, may cause interference to radio communications. It has been 
tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, 
which are designed to provide reasonable protection against interference when operated in a commercial 
environment. Operation of this equipment in a residential area is likely to cause interference in which case the 
user at his own expense will be required to take whatever measures to correct the interference. 

WARRANTY LIMITS 

Warranty will terminate automatically when the machine is opened by any person other than the 

authorized technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the 
user does not follow the instructions in application of this merchandise. The manufacturer is by no means 
responsible for any damage or hazard caused by improper application. 

ABOUT THIS MANUAL

 

This manual assists the user to utilize the LCD Monitor LM-2008 and the Touch Monitor TM-2008. 

These series provide adjustable robust construction for 8” LCD display with maximum resolution of 800 x 600. 
TM-2008 provides also a durable touch screen over the LCD panel. 

The manufacturer of the LM-2008 and TM-2008 series heartily apologizes to the user for reserving 

the right to change or to modify this manual without notice due to the rapid and constant progress and 
improvement on science and technology. The user may always obtain the most up to date information through 
any of our web sites: http://www.posiflex.com, http://www.posiflex.com.tw, http://www.posiflexusa.com. 

 Copyright Posiflex Technologies, Inc. 2009 

TRADE MARKS AND SERVICE MARKS 

POSIFLEX is a registered trademark of Posiflex Technologies, Inc.. 

Other brand and product names are trademarks and registered trademarks and service marks of their 

respective owners. 

 

LM-2008 / TM-2008

 

LCD / Touch Monitor

 

User’s Manual

 

Rev. Original

P/N: 18320900010 

Summary of Contents for LM-2008











Reviews: