background image

 

 

Part 5 

20.  Auxiliary cable exit 
21.  Rubber feet 

22.  Optional CDROM drive 

PRODUCT FEATURES 

Standard Features: 

a) 

CPU: VIA C7 1.5 GHz or above 

b) 

Fanless structure with Aluminum die cast main unit casing

 

for harsh 

environment 

or metal

 

c) 

Data storage device:  SATA  HDD 3.5”  80 GB in base stand or  IDE 
HDD 2.5” 40 GB in main unit.

 or uDOC

 

d) 

An advanced slim or universal base design. The slim base supports 2

nd

 

LCD display or pole mount customer display on rear base, storage room 
for 3.5” HDD and optional  UPS battery in base. The universal base 
supports extensive features as 2

nd

 LCD display or pole mount customer 

display  on rear base, 3.5” HDD housing, power  adaptor housing, 
optional UPS battery storage in base. Also possible to be without base 
but wall mount bracket for wall mount application. 

e) 

Support WinCE, Win XP Pro, WEPOS,  POS Ready and Linux 
environment 

f) 

High quality 15” TFT active matrix LCD panel. 

g) 

Brightness control by either software or hardware 

h) 

Vertical type LCD panel with easy tilt

 angle adjustment from 15° to 

70° 

i) 

Durable resistive type  (leading edge  Infra  Red type optional)  touch 
panel that endures 35 million touches min. at same spot 

j) 

Spill proof water resistant structure allowing easy cleaning 

k) 

Easy maintenance construction 

l) 

Various I/O ports supported, including: 
1.  one PS/2 KB port (inside touch-open cover) 
2.  4 serial ports with capability for +5V DC support in form of 10 pin 

RJ45 jacks 

3.  one parallel port 
4.  4 standard USB ports 
5.  one proprietary USB port for optional side mount kit (e.g. SD-400) 
6.  one LAN port 10/100 base T Ethernet 
7.  one external VGA monitor port 
8.  one 4 pin lock type DC 12 V power input connector 
9.  one UPS battery connector 
10. one “EXT PWR” port for power supply to SATA device 
11. 2 SATA ports for Serial ATA HDD in base or external device 

Summary of Contents for KS - 6215N





















Reviews: