11
Replacing POS Receipt Printer Module
HS-3310A/3314A offers a quick solution to help you to replace POS receipt
printer module when there is a need. Please go through the steps described
below to achieve the purpose. Before proceeding the procedure, please ensure
that the terminal is completely shut down.
1.
After laying POS terminal on a flat surface
with its bottom facing towards you, remove
the screw shown by the arrow.
2.
Position the terminal with its screen facing
toward you, and then push down the paper roll
cover release lever to open the paper roll cover,
3.
Inside the paper roll compartment, remove the
two screws indicated by the arrows.
4.
While supporting the terminal with one hand,
grab the right-hand side of the terminal and
then pull the front cover towards you with
force to separate the printer module from the
rear case of HS-series
5.
From the left-hand side of the terminal, remove
the front cove from the rear case.
