POSIFLEX CD-3870, User Manual

Page: 20 / 56

2.4 Character Installation
The first and last characters:
You can put 10 ASCII at most in front of the barcode
data. When the installation “0”, it means that you
don’t need to add the first and last characters. Please
find the format as below:
The First Character Barcode The Last Character
The process for adding the first and last characters to
the barcode:
1.
Scan the barcode of “Start Configuration” and
“The First Character Installation”.
2. Check the ASCII table to get the ASCII code of
the first and last characters.
3. Scan the ASCII barcode in the Appendix.
4. Scan the “End Configuration” barcode.
G1/G2 character Insertion:
You can put 10 ASCII at most in front of the barcode
data. When the installation is “0”, it means that you
don’t need to add the first and last characters
.
1. Scan the “Start Configuration” and “G1 Insert
Character”
barcodes.
2. Check the ASCII table to get the ASCII code of
the first and last characters.
3. Scan the ASCII barcode in the Appendix.
4. Scan the “End Configuration” barcode.
5. Repeat the same process to the G2 insertion.
6. Scan the “End Configuration” barcode.
The position of G1/G2 character insertion:
Select a character insert to the barcode. You can’t
insert any character while the installation is “0”.
Scan the “Start Configuration” and “G1 character
insertion position”
the barcodes.
1. Check the ASCII table to get the corresponding
ASCII code of the insertion position.
2. Scan the “End Configuration” barcode.
16